Skip to content
WhatsApp us Call +91 88676 64454 Request quote
Back to blog

Safety & PPE

Custom logo printing on reflective jackets: screen print, heat transfer, reflective print, embroidery

By Ravi · Safety & PPE specialist Published 6 min read
Custom logo printing on reflective jackets: screen print, heat transfer, reflective print, embroidery

How do you put a logo on a reflective jacket without ruining it? Print or embroider on the fluorescent fabric, keep the logo clear of the reflective tape, and choose a method that survives the wash on polyester.

At Sri Ganesh Textiles, Bangalore, we make reflective jackets and vests from 50 pieces and apply logos and names on the same order, so you deal with one supplier.

Which logo method suits a reflective jacket?

MethodGood forWatch out for
Screen printSimple logos, large runs, solid coloursNeeds a fabric that takes the ink; check wash life on polyester
Heat transferMulti-colour logos, small runs, names and numbersEdges can lift in hot industrial washing if applied badly
Reflective printA logo that also reflects at nightDoes not replace the required tape; confirm it does not affect class
EmbroideryPremium look, heavier fabricToo dense on light mesh and it puckers or tears

For daily-wash garments the question is how the method behaves on your fabric. Send a sample requirement and we confirm which method we recommend before production.

Which method survives washes on polyester?

Polyester and fluorescent dyes are slick and can be hard for some inks. We do not promise a wash count in advance. Ask any supplier to show a washed sample and give the number of cycles and the wash method. Embroidery is usually the most durable on solid fabric. On mesh, print or transfer is more practical.

Where should the logo go?

Keep the logo on fluorescent fabric only, never across the reflective bands, because covering tape reduces the visible area and can change the class.

  • Back: the main logo, below the shoulder bands and above the lower band.
  • Left chest: a small logo or the company name.
  • Sleeve: only if there is clear fabric between the bands.

Send us the jacket drawing or tell us the class and we plan placement around the tape. See what drives reflective jacket price for what each extra position adds.

Can we print names and IDs for contractors?

Yes, ask for it in the quote. A name or ID number on the chest helps site supervisors and access control. Give us the name list in a spreadsheet and the size for each person, so each jacket is made and labelled correctly. For many contractors, a numbered series with the same layout works better than individual designs.

What is the MOQ for printed vs plain jackets?

Our minimum is 50 pieces per order for plain or logo jackets. Logo setup is a fixed cost per design, so one design across all 50 is cheaper than five designs of 10. See uniform order minimum quantities.

What is the artwork and proof process?

  1. You send the logo as a vector file (AI, EPS or PDF) or a high-resolution image.
  2. We confirm the method and placement.
  3. We send a proof showing size and position on the jacket.
  4. You approve the proof, and we make a sample if required.
  5. We release bulk production.

Sample approval before bulk is the step that prevents a whole batch being wrong.

Should the logo colour match the fluorescent ground?

Use a dark colour on orange or yellow-green for contrast, and avoid light colours that disappear on fluorescent fabric. For a combined uniform and safety programme, see colour coding on industrial workwear.

Ready to order?

Send the logo, quantity, class and placement. See reflective jackets and hi-vis vests or WhatsApp your artwork. Quotes go out within 24 hours.

FAQ

Can you print a logo on a reflective jacket? Yes. We confirm screen print, heat transfer or embroidery for your fabric.

Can the logo go over the reflective tape? No. Keep it on the fluorescent fabric so the tape stays unobstructed.

Which method lasts longest on polyester? It depends on the fabric. Ask for a washed sample with the cycle count.

What file do you need for the logo? A vector file is best.

Can you add names or ID numbers? Yes, send the list with sizes.

What is the minimum order? 50 pieces.

Get started

Submit your bulk requirement.

Built for orders of 50 pieces or more, which is where bulk pricing starts to pay off for you. Quotes come back within 24 hours on business days.

Request quote

Submitting this form is consent to be contacted by Sri Ganesh Textiles regarding your bulk order. We do not share your details with third parties.