Skip to content
WhatsApp us Call +91 88676 64454 Request quote
Back to blog

Safety & PPE

Reflective jackets for NHAI, metro and road construction contractors: spec, class and tender wording

By Ravi · Safety & PPE specialist Published 6 min read
Reflective jackets for NHAI, metro and road construction contractors: spec, class and tender wording

What reflective jacket should a road or construction contractor buy? Match the class to the traffic around the worker. Near moving vehicles or at night, buy the full-sleeve Class 3 jacket. In yards and low-speed areas, Class 2 is the usual choice. Your client or authority’s site rules decide the final requirement, so get it in writing before you order.

At Sri Ganesh Textiles, Bangalore, we make reflective jackets and vests from 50 pieces and quote to the class and standard you specify.

How do you choose Class 2 or Class 3 for a work zone?

Work areaUsual choiceWhy
Material yard, batching plantClass 2Slow vehicles, torso visibility enough
Roadside work with passing trafficClass 3Drivers need to see limbs and body
Night shifts on road or metroClass 3Sleeves and body bands give the human outline
Site office and visitorsClass 2 or visitor vestLow exposure

This is general guidance. Your concession agreement, client safety manual or the authority’s work-zone rules may specify more. Quote them in your tender and we match the garment to it. For the standard itself see IS 15809 explained.

What matters for night work?

  • Sleeves and shoulder bands: movement of arms is what drivers recognise first.
  • Tape type: glass bead or micro-prismatic tape returns more light than basic tape. Ask for the type in writing.
  • Stitched, not glued: stitched tape stays on after repeated washing.
  • Colour: fluorescent orange or yellow-green; pick one and keep it across the site.

What goes into the tender wording?

Write one clear line per item, for example:

High-visibility jacket, standard and class stated, fluorescent colour, retroreflective tape type and width stitched down both edges, sizes S to XXL, company logo at back, quantity, delivery site.

State the standard, the class, the tape, sizes, logo and the documents the supplier must provide. Suppliers who leave these out are quoting a different garment.

Can you buy the full PPE kit on one PO?

Yes. Contractors usually issue the jacket, helmet and safety shoes together. One PO means one supplier file, one delivery and one set of documents for the client audit. See PPE kit supply for bulk buyers and industrial workwear.

How should you size for a large labour headcount?

Labour teams vary a lot in build. Free-size jackets suit short-term gangs but fit badly at the extremes, and a jacket that flaps is a snag risk on machinery. For permanent crews order a size range, S to XXL, with a size split from your headcount. We suggest a split if you give us the average builds, and add a small buffer for new joiners.

How do rate contracts and reorders work?

Contractors reorder as headcount changes. Ask for the specification to be fixed in the rate contract (fabric, tape, class, colour) so a later batch matches the first. Hold a reference sample on file. We reorder against the same specification so batches match.

What should you ask a supplier before you award?

  1. Class and standard stated on the quotation.
  2. Tape type and stitching.
  3. Test report and any certification documents they can supply.
  4. Sample approval before bulk.
  5. Per-piece price in writing, GST shown per line (HSN and GST for safety jackets).

Ready to order?

Send headcount, class, site type and delivery location. See reflective jackets or WhatsApp your requirement. Quotes go out within 24 hours, from 50 pieces.

FAQ

Which jacket should construction workers wear? Class 3 near traffic or at night, Class 2 for yards and low-speed zones.

Do NHAI projects require a specific class? Requirements come from the project and authority documents. Check your contract and send us the clause.

Can I buy helmets and shoes with the jackets? Yes, on one PO.

What sizes do I need for a labour team? A range S to XXL based on your headcount split.

Can the specification be locked for reorders? Yes, state it in the rate contract.

What is the minimum order? 50 pieces.

Get started

Submit your bulk requirement.

Built for orders of 50 pieces or more, which is where bulk pricing starts to pay off for you. Quotes come back within 24 hours on business days.

Request quote

Submitting this form is consent to be contacted by Sri Ganesh Textiles regarding your bulk order. We do not share your details with third parties.